Neoflon® PFA AP-210
GenericName: 全氟烷氧基(PFA) - 提供方: DAIKININDUSTRIES, Ltd.
NEOFLON PFA AP-210 is excellent in melt flowability and issuitable for injection molding and extrusion molding.
Introduction
AP-210 is a copolymer of tetrafluoroethylene and perfluoroalkylvinyl ether.
Good melt flowability while maintaining excellent properties ofPTFE. It can be melt-molded as a thermoplastic resin by injectionmolding and extrusion molding.
Excellent chemical resistance which is not affected by most ofthe chemicals.
Excellent heat resistance. Continuous use temperature is260°C.
It retains flexibility without losing toughness under theenvironment from cryogenic to high temperature.
Low dielectric constant and dielectric loss tangent in a widerange of temperature and frequency.
It shows high electrical resistance and dielectric strength.
Nonflammable like POLYFLON PTFE and NEOFLON FEP.
Excellent weather resistance. No properties change even whenexposed outside for a long time.
Non-stickiness. It shows excellent releasability and waterrepellency / oil repellency.
与典型值比较 - Upgradeto compare!
单位: SI
| 总览 | |
| 材料状态 | 已商用：当前有效 |
| 资料 1 | Technical Datasheet (English) |
| 搜索 UL 黄卡 | DAIKIN INDUSTRIES, Ltd. Neoflon® |
| 供货地区 | 北美洲 非洲和中东 拉丁美洲 欧洲 亚太地区 |
| 特性 | 共聚物 良好的柔韧性 流动性高 耐候性，良好 耐化学品性能，良好 耐热性，高 韧性良好 |
| 加工方法 | 挤出 注射成型 |
| 物理性能 | 额定值 | 单位制 | 测试方法 |
| 密度 / 比重 | 2.14 | g/cm³ | ASTMD792 |
| 熔流率（熔体流动速率） (372°C/5.0 kg) | 14 | g/10 min | ASTMD3307 |
| 机械性能 | 额定值 | 单位制 | 测试方法 |
| 抗张强度 | 31.0 | MPa | ASTMD1708 |
| 伸长率 (断裂) | 420 | % | ASTMD1708 |
| 热性能 | 额定值 | 单位制 | 测试方法 |
| 连续使用温度 | 260 | °C | |
| 熔融温度 | 306 | °C | DSC |
