Neoflon PFA AP-201
GenericName: 全氟烷氧基(PFA) - 提供方: DAIKININDUSTRIES, Ltd.
NEOFLON PFA AP-201 is a high flowability fluororesin.
It is suitable for injection molding of complicated shape productsand extrusion molding of thin wall electric wire.
Introduction
AP-201 is a copolymer of tetrafluoroethylene and perfluoroalkylvinyl ether.
Good melt flowability while maintaining excellent properties ofPTFE. It can be melt-molded as a thermoplastic resin by injectionmolding and extrusion molding.
Suitable for injection molding of complicated shape products andextrusion molding of thin-walled electric wires.
Excellent chemical resistance which is not affected by most ofthe chemicals.
It retains flexibility without losing toughness under theenvironment from cryogenic to high temperature.
Low dielectric constant and dielectric loss tangent in a widerange of temperature and frequency.
It shows high electrical resistance and dielectric strength.
Nonflammable like POLYFLON PTFE and NEOFLON FEP.
Excellent weather resistance. No properties change even whenexposed outside for a long time.
Non-stickiness. It shows excellent releasability and waterrepellency / oil repellency.
与典型值比较 - Upgradeto compare!
单位: SI
总览 | |
材料状态 | 已商用:当前有效 |
资料 1 | Technical Datasheet (English) |
搜索 UL 黄卡 | DAIKIN INDUSTRIES, Ltd. Neoflon® |
供货地区 | 北美洲 非洲和中东 拉丁美洲 欧洲 亚太地区 |
特性 | 共聚物 良好的柔韧性 流动性高 耐候性,良好 耐化学品性能,良好 韧性良好 |
用途 | 电线电缆应用 |
加工方法 | 电线&线缆挤出成型 注射成型 |
物理性能 | 额定值 | 单位制 | 测试方法 |
密度 / 比重 | 2.14 | g/cm³ | ASTMD792 |
熔流率(熔体流动速率) (372°C/5.0 kg) | 28 | g/10 min | ASTMD3307 |
机械性能 | 额定值 | 单位制 | 测试方法 |
抗张强度 | 32.0 | MPa | ASTMD1708 |
伸长率 (断裂) | 410 | % | ASTMD1708 |
热性能 | 额定值 | 单位制 | 测试方法 |
熔融温度 | 303 | °C | DSC |