Tefzel 美国科慕 ETFE 750 乙烯四氟乙烯共聚物 管材级特氟龙

Tefzel 750 Gas Igniter

Generic Name: 乙烯四氟乙烯共聚物(ETFE) - 提供方: The ChemoursCompany

DuPont™ Tefzel ® fluoropolymer resins offer mechanical strengthand toughness along with resistance to heat and chemicals. Inaddition, they provide easy processing, high specific dielectricstrength, and a low coefficient of friction. For these reasons,Tefzel ® resins are widely used to make compact wire and cableconstructions that provide long, reliable service in demandingenvironments.

Tefzel ® 750 retains the traditional characteristics of Tefzel ®resins while providing some new property advantages, includingincreased flexibility and improved retention of properties afteraging at elevated temperatures, higher limiting oxygen index, andlong-term service life at higher temperatures than other Tefzel ®resins.

Underwriters Laboratories, Inc. (UL) has rated wire insulated withTefzel ® 750 (10 mil for 600V, 6 mil for 300V) for service inappliances at a maximum continuous operating temperature of 200°C(392°F). This rating was determined under the guidelines of ULSubject 758 for appliance wiring material. Upper servicetemperatures for other applications should be determined under theguidelines for those applications. Temperature ratings may not bethe same as the rating for appliance wire because the testprocedures are different.

Typical End Products
Tefzel ™ ETFE 750 fluoroplastic resin can be used for wire serviceat up to 200 °C (392 °F).Tefzel ™ ETFE 750 can also be used asinsulation for applications where customers need the basic benefitsof Tefzel ™ together with increased flexibility and improvedretention of properties after aging at elevated
temperatures. Flexibility is desirable for ease of handling duringmaintenance and repair procedures.

 与典型值比较 - Upgrade tocompare!  与黄卡比较

单位: SI 

总览
材料状态

已商用：当前有效

资料 1

Technical Datasheet (English)

UL 黄卡 2

E54681-244670

搜索 UL 黄卡

The Chemours Company

Tefzel®

供货地区

北美洲

拉丁美洲

欧洲

亚太地区

特性

低摩擦系数

共聚物

良好的加工性能

良好的柔韧性

耐化学品性能，良好

耐热性，高

韧性良好

用途

电线电缆应用

电子绝缘

形式

粒子

加工方法

挤出

物理性能

额定值

单位制

测试方法

密度 / 比重

1.75 到 1.79

g/cm³

ASTM D792熔流率（熔体流动速率） (297°C/5.0kg)

7.0

g/10 min

ASTM D3159机械性能

额定值

单位制

测试方法

抗张强度

ASTM D170823°C

37.9

MPa

140°C

11.4

MPa

160°C

8.62

MPa

180°C

6.21

MPa

200°C

3.45

MPa

伸长率

ASTM D1708断裂,23°C

300

%

断裂, 140°C

600

%

断裂, 160°C

650

%

断裂, 180°C

600

%

断裂, 200°C

600

%

弯曲模量

645

MPa

ASTM D790热性能

额定值

单位制

测试方法

熔融温度

219 到 254

°C

ASTM D3159可燃性

额定值

单位制

测试方法

极限氧指数

34

%

ASTM D2863补充信息

额定值

单位制

测试方法

MIT Flexural Life

120000

挤出

额定值

单位制

料筒1区温度

288

°C

料筒2区温度

316

°C

料筒3区温度

321

°C

接头温度

321

°C

熔体温度

332 到 335

°C

口模温度

332

°C